Soil pH Tester, 3/4 in 1 PH Light Moisture Acidity Tester Soil Tester Moisture Meter Plant Soil Tester Kit for Flowers

Analyzers>>>Tools

Brand Name LPPCOLTD

Certification NONE

Origin CN(Origin)

With Backlight Or Not Yes

Is Smart Device no

Model Number LPP001

Display Type ANALOG

Analog Meter P1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet)H Moisture Light

Digital meter PH Moisture Light Temp

ph tester 3.5-9.0 ph value

Moisture meter 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet)

Ships From

China

Russian Federation

Color

Soil Moisture Meter 3 in 1 PH Light & Moisture Plant Tester Home Farm Lawn Indoor&Outdoor(No Battery Needed)

3-in-1 Function: You can know when to watering by measuring moisture content of soil. The 3-in-1 soil pH testers also can test the sunlight ,let you know if plant get enough light, it is good for its health. The most important is that the moisture pH meter can help you control PH level in soil, acidic or alkaline until it suitable for your plants.✅ Accurate Reading: pH Range: 3.5-8ph (3.5-6.5 Acid, 7-8 Alkaline), Moisture Range: 1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet), Relative Light: 0-2000lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 High).After a while, you will get a accurate data.✅ Indoor & Outdoor Use: This moisture meter is a ideal tool to test the soil conditions ( Moisture/Light/PH) of fruits, flowers, vegetables, shrubs, etc. with high accuracy and simple operation. You can take good care of your plants.It is the ideal soil test kits for plant care, home and garden, lawn, farm.✅ Multi-function：1.Let you know when to water. You will never over/under water your plants again with this tester. 2.Help you to control Ph level in soil, acidic or alkaline is suitable for your plants. 3.Help you to determine if plant getting adequate light.3-in-1 Function Soil Tester1.Moisture Test :You can know when to watering by measuring moisture content of soil.2.Light Test :The 3-in-1 soil pH testers also can test the sunlight ,let you know if plant get enough light, it is good for its health.3.PH Test :The most important is that the moisture pH meter can help you control PH level in soil, acidic or alkaline until it suitable for your plants.How to Use:Step 1: Switch to moisture/pH/light position according to demandStep 2: Insert the probe into the soil about 2-4 inchesStep 3: Adjust the position of the probe until the pointer on the dial swing slightlyStep 4: Check moisture/pH/light level in the dial after 10 minutesStep 5: Remove probe from soil and wipe clean after each useWarm Tips:1. To avoid damaging the probe, do not use in soil meter with stones and insert forcibly.2. Please wipe and clean the probe after each time using.3. Don't leave the meter in the soil for a long time.4. Designed for testing soil, don't use it to test pure water or other liquids.Important Notes:▼Please note do not touch the stone or hard rock soil, It’s easy to damage the probes if the soil is too hard and dry.▼Do not use it to test pure water or other liquid, electrolytic response index will be affected, it can only be used to measure the soil.Specifications:Moisture Range:1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet).Relative Light:0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh).PH Range:3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline).Product Size: 10.2 x 2.0 x 1.2 inches.Probe length: 7.0 inches.Distance between probes: 0.4 inch.Copper probe diameter: 5 mm.Aluminum probe diameter: 5 mm.

Digital 4 in1 Soil PH Tester Water Moisture Light Sunlight Test Meter For Garden Plant Flower Acidity Moisture Measurement Tools

Special reminder:1. Don't use it to test liquids.Used to test soil only. 2. Install the battery and remove the probe cap before use (9V battery is required)3. After using it for a period of time, the screen will only show the green screen instead of the number,That means the battery is dead.(There is no need to worry about damage to the instrument,Just replace it with a new battery.) 3. When the soil is too dry, wet it first and then test it. 5. If the soil is too dry and fertile, sprinkle with water and test again half an hour later.Four kinds of function❇ measuring light intensity of the current environment:Low, low, low +, NOR-, NOR+, HGH-, HGH, HGH+❇ 2. Measure the soil moisture content:Dry, dry, wet, wet +3. Measurement of soil temperature:Temperature measurement range :-9~+50℃(16~122℉). 3. Measure the pH of the soilPH measurement range :3.5-9.0Why we were chosen:Large screen display data, use more intuitive and convenient. The results can be measured quickly in 3 seconds without waiting. Exquisite workmanship, humanized design, durable quality, easy to carry the whole machine. Four modes: one-button switching, sensitive sensing,Accurate measurement of different types of readings, etc.Usage:Step 1: Switch to wet/temperature/light or pH/light positions as required. Step 2: Insert probe into approximately 2-4 inches of soil. Step 3: Check the humidity /pH/ light/temperature level in the dial after 3 seconds. Step 4: Remove the probe from the soil and wipe it clean after each use.Features:Size :340mm * 63mm * 36mmProbe length :195mmNet weight :3.53 ounces (100 grams)Packaging includes:1 x soil metersSpecial TipsPlease read these before using!1 Not suitable for liquidsDon't use it to test any kind of liquid. It can only be used to test soil.2 Need 9V batteryAfter using for a period of time, the screen only shows a green screen without displaying numbers,which means that the battery is dead.3 Water very dry land firstWhen the soil is too dry, please wet the soil first and then test it.4 Wait for a whileIf the soil is too dry and fertile, sprinkle some water and test again after half an hour.